MXR5000IE 5000W Electric-Start Inverter Generator - Remote Start

Yes, anytime. Call or text 314-833-8000 or email sales@durvy.com. We provide direct support from our Union, MO location.

1× Generator, 1× Spark Plug Socket Wrench, 1× Oil Funnel, 1× RV30 Plug, 1× Generator Parallel Cables, 1× Screwdriver, 1× Remote Controller, 1× 20A Plug, 1× Owner Manual.

No. The MXR5000iE ships without engine oil. Add SAE 10W-30 oil (0.1 gal capacity) before attempting to start it. Starting the generator without oil will cause serious engine damage.

Oil: SAE 10W-30 (0.1 gal capacity). Gas: Unleaded gasoline, max 10% ethanol. Do not use E85 or E15.

The included key fob starts and stops the generator from up to 65 feet away. This is a dedicated wireless remote start — not an app or Bluetooth feature. Electric push-button start and recoil pull-cord are also available as backups.

Check oil (SAE 10W-30, 0.1 gal capacity) and fuel levels, start the generator and confirm it runs cleanly, and pack a spare quart of SAE 10W-30 oil and a backup A7RTC spark plug.

Yes, with a soft-start capacitor installed. A standard 13,500 BTU RV air conditioner has a startup surge of approximately 2,800–3,500W without a soft starter. With a soft starter, the surge drops to under 1,800W — well within the 5000W peak capacity. Call us at 314-833-8000 to confirm compatibility with your specific AC unit.

At 65 dB, the MXR5000iE is a genuine inverter generator — meaningfully quieter than conventional open-frame generators (typically 72–80 dB). Most campgrounds and RV parks that allow generators will accommodate this noise level. Check the specific rules at your destination before you go.

Portable generators have a floating neutral. Many RV EMS and surge protector systems require a bonded neutral. Use a neutral-ground bonding plug in one of the 20A outlets to resolve this.

Yes. Use a Maxpeedingrods parallel kit (sold separately) to link two units for approximately double the output. This gives you a scalable setup without buying a single larger unit.

No. Turn ECO mode off before starting heavy loads — air conditioners, compressors, table saws — so the engine runs at full RPM for the startup surge. Turn it back on once the load is running.

For essential backup use, yes — with significant headroom. A refrigerator, chest freezer, window AC, sump pump, lights, router, and chargers typically draw well under 3,800 running watts combined. The MXR5000iE handles that load comfortably.

Yes. Starlink draws approximately 50–75 running watts. The MXR5000iE’s pure sine wave output is well-suited for Starlink and all other sensitive electronics.

Running watts (3,800W) is the continuous output — what the generator can sustain hour after hour. Peak watts (5,000W) is the surge capacity available for 1–2 seconds when a motor-driven appliance starts. Plan your load based on running watts, and make sure any motor-driven appliances have a startup surge that falls within the 5,000W peak.

A Maxpeedingrods parallel kit (sold separately) connects two MXR5000iE generators. Combined output is approximately double. This is a cost-effective way to scale power without buying a larger, heavier single unit — and you get the flexibility of using one generator for lighter loads.

Yes. The inverter module produces pure sine wave output with less than 2% THD — the same quality of power you get from a household outlet. Laptops, CPAP machines, Starlink routers, cameras, and similar electronics can be connected directly without risk of damage from power quality issues.

Two paralleled MXR5000iE units provide approximately 7,600 running watts, which is sufficient for most 50-amp RV loads. You’ll still want a soft starter on any air conditioning units. Call us at 314-833-8000 to walk through your specific RV setup before purchasing.

Check engine oil (SAE 10W-30, 0.1 gal capacity) before each use. For oil change intervals and the full maintenance schedule, refer to the owner’s manual. Download the PDF at the link above or call us for a copy.

The MXR5000iE uses an A7RTC spark plug. Keep a spare on hand before any extended trip.

For short storage (under 30 days): add fuel stabilizer to the tank. For longer storage: drain the tank and carburetor completely by turning the fuel switch OFF while the engine is running and allowing it to use remaining fuel before shutting down.

Stale gasoline is the most common cause. Gasoline can varnish in 30–60 days without a stabilizer, clogging the carburetor. Drain the tank, add fresh gasoline, and try again. If it still won’t start, call us at 314-833-8000.

It is equipped with a spark arrestor and operates as an inverter generator. Check the specific campground or park rules before use, as noise and equipment requirements vary by location.